View Single Post
  #5  
Old 05-21-2011, 11:12 PM
bgadow's Avatar
bgadow bgadow is offline
VideoKarma Member
 
Join Date: Oct 2003
Location: Federalsburg, MD
Posts: 5,865
I would at least try manually degaussing it. Assuming you don't have a degaussing coil, do you have a soldering gun? (not an iron) A tape demagnetizer can also work. Turn it on, pass it near the screen in slow circles then gradually back away from it as far as you can, then turn it off. Do it while the set is on so you can see the results.
__________________
Bryan
Reply With Quote
Audiokarma