View Single Post
  #9  
Old 05-18-2011, 10:08 PM
doogie812 doogie812 is offline
VideoKarma Member
 
Join Date: Jan 2011
Location: White Lake MI
Posts: 76
RCA Flybacks from CTC-11 to CTC 16 are all electrically the same. With some hay wiring you can make them work. What I did was to mark the leads with the schematic in front of me so I know where to connect the wires in the destination set. Back in the day when RCA were smoking flybacks with the 3A3 plate cap on the donut I was using flybacks with plate cap leads. A little time consuming but hay if its on the shelf use it! Doogie
Reply With Quote