|
Tape does not generally erase itself magnetically beyond a possible loss of maybe 3dB due to magnetic domains that weren't firmly aligned, going back to random orientation.
The Cartrivision folks studied this very carefully, as they intended to use a thermal contact printing process for duplicating tapes, and they needed to know what processing was necessary to get maximum transfer. The thermal transfer was like an instantaneous life test. They found that whatever temperature/time profile they used (within reason) the maximum degradation was 3 dB.
Degradation of tape is generally due to chemical/mechanical deterioration, so storage conditions are important, as are the formulation of the plastic base and the binders that hold the oxide on. The oxide itself, however, retains its magnetism well, as far as I know.
I have noticed 8mm camcorder tapes developing increasing dropouts after 20 years, so that would be a reason to make copies.
|