Quote:
Originally Posted by ctc17
Is this 240 volt 50 hz SECAM? How would this work here in NTSC land?
|
If it's B&W, just set your DVD player to "PAL" mode. That will put the deflection rates that will match what SECAM used. But you need a special TV modulator that can get the signal onto a channel this set can tune, and more significantly, the FM sound subcarrier is something different than the American 4.5MHz, 6.5MHz I think it may be. You might be able to hack an American mode TV modulator by changing the LC circuit for the sound subcarrier.
As for the power, 60Hz should be fine. An outlet like the below, 230VAC @20A and 60Hz would be what you'd want to install. Usually used for larger window air conditioners. Both sides of the American pair of 115VACs feed this kind of outlet, plus a safety ground. Here I installed this in the kitchen, and grabbed 230V off the electric heat circuit ahead of the thermostat (protected by a 20A breaker). Don't tell my landlord, but landlords never notice things like this (I did it neater and reasonably code compliant than their maintenance staff would have, and with 200 units in this 25 year old complex they won't remember that it wasn't there before, and some units were recently redecorated so the units already look different from each other anyway), but they do notice things like dirty bathrooms when time comes to move out.
So now I can power my various Australian and European radios, which are perfectly happy with 60Hz. Their 50Hz power transformers run cooler on 60Hz.