Whoever designed this set didn't give much though to repairs. I found a big multi-section box cap wedged tight under the tuner cap.
The only way to get it out is to remove at least one of the tuning cap mounts. To get at those, I'd need to open up one if the copper box shields and unmount a coil. Way too much work and too great a chance for damaging something. So, I'll just disconnect it and mount new caps under the chassis.
The paper box cap was definitely from an old repair. It was soldered directly across one side of the original 2/14 MFD can cap.
I love these color coded tube sockets