Quote:
Originally Posted by dieseljeep
That set uses a 17gp4, a metal cone crt. It also uses a 1V2 for a focus rectifier, like a color set. I haven't seen one of those things in years.
|
When I looked at this tv on Thursday and tested the CRT It didn't look like a metal and glass CRT. My first reaction after removing the back was that the CRT had been replaced. The rubber gasket that goes between the CRT and the cabinet was just sort of stuck in there most of it wasn't where it should have been yet there was no gap between the CRT and the cabinet as seen from the front. The two metal bars that support the CRT running from the neck of the CRT to the front pannel were loose, one was completely off. The cap on the CRT was unusual it was an off green color with no MFG name on it. The CRT tested good to about 25% on the BK meter. I didn't buy it because of what I just described but also because the channel knob and plate was damaged and the chassis looked like it had been dipped in gooo. This tv has a metal cabinet with a wood grain finish. The cabinet was badly scratched on the sides.