View Single Post
  #4  
Old 03-21-2011, 03:53 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
I've scrapped dead tube VGA monitors, but I was after the high voltage caps and power resistors and the damper diodes make for good high voltage rectifier diodes in tube hifi audio amps. The bridge rectifiers for their switching power supplies were nice too. And lots of heat sinks. And inductors for higher frequency work. So now I have a pretty well supplied "junk box" of parts. usually it was the horizontal output transistor and flyback that failed to cause the monitor to be junked, but most of the rest of the parts were still fine. But it took me a lot longer to tear down a "chassis" than the guy in the video.
__________________
Reply With Quote