Charles, Is the HVR the red thing in the 2nd anode line?
Any way to check it, it seems permanently attached to the Flyback.
I'll sub those caps you suggest, I already pulled the Filter and subbed it with no effect.
Update to my previous comments about no reception, I didn't have the r.f. Modulator plugged in, I found that out later last night when I was working on another set. I'll have to try this one again.
Quote:
Originally Posted by kx250rider
If the Variac is on 117, and the 135 line is at 127, you have a load on it. Those regulate VERY well when working right, and you can keep 135 with as low as 95 or so line voltage. I'd check the two 10uF caps (160 or 250v?) near the regulator, and also keep in mind that the HVR block might be loading down the whole set if it's leaky internally.
Charles
|