|
it did not test well but aside from that I makes a very good pic, looks better than the screen shots. Its a bit reddish (like the screen is too high) for the 1st few seconds, but by say 30 seconds after it comes up its fine.
I like the idea of soldering the HOT in place. Kinda scary from the stand point of ever having to remove it, but I can see how that could be a real problem area esp if its not used a lot (slight corrosion causing lack of good connection at the pins).
I will prob pull the chassis one more time and clean all the module pins, solder that HOT in and call it done. Its been coming right on with no issue, and running for hours with out a hint of a problem.
The only thing that is odd is the horz control, very sensitive, you can flop it one way and then the other with just a turn of maybe 5 degrees, but once its locked in the stays locked. On my other sets you can move the horz adj a lot before losing sync.
I have a lot of more interesting sets I need to get to work on so I dont want to spend too much more time on this. I hope to just button it up, maybe do a minor bit of clean up, then stow it until I can find a home for it.
|