Quote:
Originally Posted by stusnyder
I took notice on the e can caps that they are not grounded to the chassis, how come?
So where do you put the negative wires from the new replacment electrolitic caps?
The cans have carboard covers on them.
|
The chassis is in the bias supply. They have 90 volts positive going to chassis from B-.
These sets have a somewhat complicated negative bias supply. All voltages are handled with the big power resistor on the back of the chassis.
When working properly, these sets are tood performers, and, have very good contrast, and, decent brightness.
Not really a bad little set.
Bill Cahill