|
well other than the pilot light and the deguasse its dead as a door nail now.
it was coming on for a few seconds then shutting down, but now I seems to lack any B+ anywhere. Guess I will pull the chassis out and check around again. The fuse off the power supply board (right at the interconnect is still in place but seems to have sagged a bit in the middle.
I would be nice to be able to work on the chassis on the bench to at least work out the PS issues, but I dont know how to prevent any damage to the circuits with it disconnected from all the CRT grounds and anode.
Oh and that can on the power supply board (again I think its some kind of relay in a small round can was warm).
|