View Single Post
  #54  
Old 03-07-2011, 03:35 PM
maxhifi's Avatar
maxhifi maxhifi is offline
VideoKarma Member
 
Join Date: Dec 2010
Posts: 1,871
Thanks much for the input! Sorry to drag this out so long, but hopefully the result will prove useful to someone else at one point.

Found a 6AX4 GTB which tests a bit higher than the original, and all others I have on hand. Bars still present as ever - no change. C174 is a tiny ceramic disc, not a mica, but jumpered it with a 0.01uf disc also to no result.

Looks like in this circuit, the damping is taking place through C173, since the boost voltage is in series with the B+. All the same, I have changed it out already without results.

The bars are present either with a program, or with no signal and a blank raster.
Reply With Quote