|
Have a couple more observations about this little TV.
1) The problem Phil encountered with the picture being tilted, seems to be because the yoke is held in place with spring pressure, and rotates on its own a bit when the chassis is installed back into the cabinet. It can be corrected by removing the control door, and inserting an insulated flat blade screwdriver into the tv with the guidance of a flashlight, and using it to move the yoke into correct alignment. It seems like every time I move the TV, the picture gets a bit tilted.
2) The TV is fairly poorly shielded. My cable box puts out a signal on 3, and since there is also a broadcast station on this channel, the interference ends up as lines on the picture. Using a VCR as a video modulator gives me a nice crisp picture.
3) White screen or text puts an unacceptable amount of buzz into the audio. Can anything be done to help this?
|