|
I was afraid to invest in a power supply for a 7 year old plasma because I did not know if the panel was shot. I also did not know if there were any other issues with the rest of the electronics. The power supply had a lot of SMD resistors that were buried under globs of silicone - these resistors would burn up as part of the board failure. The previous person that tried to repair it removed the silicone and replaced a lot of the SMD resistors with incorrect value standard resistors. He also made a mess out of the soldering on several power transistors.
The new power supply was a higher revision board, and most of the SMD resistors were replaced with standard resistors. Curiosity and the desire to have a working plasma forced me to take a chance and buy the power supply. I rationalized that this was an expensive set in it's day, and that it should be high quality considering that it is a Sony. I also did a search for reviews, and most of them were favorable.
I also noticed that the panel was not original because it was dated 2004, while the set was manufactured in 2003.
I was looking for a used one at half the cost, but those deals kept falling through because of screwy eBay sellers - 1 seller angered me so much that he received the first and only negative feedback that I ever gave in my 12 years on eBay.
|