View Single Post
  #33  
Old 02-25-2011, 01:30 PM
kx250rider's Avatar
kx250rider kx250rider is offline
REAL TVs have TUBES!
 
Join Date: Oct 2005
Location: Los Angeles & Dallas
Posts: 3,239
Quote:
Originally Posted by crtfool View Post
Last year a coworker gave me a KE-32TS2 that just needed a power supply - it also was marked "FLAT PANEL COLOR TV" on the top of the case. I could not get any documentation or help regarding repairing the power supply, which was not built by Sony - it was a third party unit that Sony used. I attempted to repair the power supply - which someone already attempted to make repairs on, but could not find some replacement parts, so I bought a NEW power supply that had all the latest upgrades on eBay for $135. The set works perfectly, and was well worth the investment. I am keeping the old power supply as a parts donor to make future repairs if necessary.
Two of these sets have blown power supplies, and one of them, evidently has a problem elsewhere in the set which caused a brand-new power supply board to blow. I'd be curious how to troubleshoot a problem like that, at the risk of blowing new boards. In the old days, we'd just look for a load on a line by measuring resistance to ground, and if none found, then slowly bring up a supply on the Variac and watch which line is being pulled down. That's almost impossible with these sets, and even if one WERE to find the problem, these multi-layer boards are a son of a beehive to work on. And this one has a whole load of BGA chips, which require a $50,000 projection soldering machine and an X-ray verifier to replace the chips. I think I'll chicken out on buying any new boards, at least for now.

Charles
__________________
Collecting & restoring TVs in Los Angeles since age 10
Reply With Quote