View Single Post
  #19  
Old 02-17-2011, 12:44 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
Quote:
Originally Posted by radiotvnut View Post
I've got a '53 21" Zenith that was a gift from a fellow VK'er and this set was the victim of a poor packing job (before I got it). As a result, the CRT neck was broken off. Considering how poorly it was packed, it's a wonder the set wasn't destroyed.
Did you ever get that set working? If the only problem with it is the broken CRT, a replacement should let you go ahead with any other repairs the set might need, including recapping. Those older Zeniths are excellent televisions when they are working as they should. I had a Zenith K2739 VHF-only 23" b&w set in the late '60s, trash-day find, that needed only a set of new tubes to get it working again. That was one of the best TVs I ever had; great picture and excellent sound (6BN6 gated-beam discriminator, 6x9 oval speaker and a tone control but, amazingly, no phonograph input; I would think with an audio stage such as this set had, it would have been equipped with such an input jack).

I have a Zenith MJ1035 stereo FM radio that was also a present from an AK member. The volume and tone control pots were very loose on the chassis (but the radio still worked); however, I had the chassis in and out of the cabinet so often to reseat the tone control (on which the AC power switch is mounted) and volume pot in their mounting holes that the latter became intermittent and finally quit. I emailed the person I got the set from and was told that the radio had been the victim of very rough handling by UPS between his house (near Phoenix, Arizona) and my apartment near Cleveland; this likely accounts for the broken control mountings.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.
Reply With Quote