|
Yes connecting both CRTs to the scope makes them look ok. I will remove the focus and intensity pots and isolate them from the chassis then I will see if the problem is fixed. If so I will use the intensity pots from the restored 304H. If not I will see if there is any leakage somewhere else.
Another thing I can do is put a 5ADP1 CRT in both scopes and measure the voltages on both scopes to see if there is any difference between the two scopes.
__________________
Main system
Scott LK-72A amp & LT-110 tuner
Garrard Zero 100C turntable
AKAI GX 255 RTR
iPod & computer
DIY speakers (upgrading them soon)
|