View Single Post
  #26  
Old 01-07-2011, 10:39 PM
bandersen's Avatar
bandersen bandersen is offline
RCA 741PCS
 
Join Date: Mar 2009
Location: Chicago, IL
Posts: 8,829
Quote:
Originally Posted by Eric H View Post
Has it really been three months since I got this set? seems much longer, the cabinet sat on the bench for much of that time while I worked on it, it was really an unglued mess, I had to re-veneer the top and glue almost every joint.

It came out much darker and more brown than it was, the front and edges of the side panels was done with Mohawk "Van Dyke Brown" toner, the rest was stained and toned with "Perfect Brown".

The face came out almost Ebony, like some of the early RCA's have on their trim, the sides are a dark Walnut, not original but it looks really nice to me.

I still need to get some Westinghouse decals and control lettering, also the channel numbers are arraigned around the dial so I'm going to have to cut those out and apply them one at a time, that should be lots of fun, like a hangnail.

The set's working pretty well but I can either get good volume or good picture, not at the same time though, it needs an alignment but it's watchable as it is.

The Rebuilt CRT that was in it works really well, the small knobs are borrowed off my other Westy until I can find some for this set, luckily the channel selector was there.
I think it looks great. Most things I use Mohawk on end up darker than I had intended. I may try some stain or analine dye in the future.

If you need any of the larger gold knobs, I believe I have some.

Most of my Admirals had the same issue where you get either a good picture or sound. a little tweak of the sound trap and IF did the trick. I leave the more complex video IF alone when possible.
__________________
Here are my Vintage Radio & TV YouTube Channel and Photo Gallery
Reply With Quote