|
I agree with Eric on a nasty set to take it out of the cabinet. I suspect this cabinet is plastic: spray with your favorite cleaner, scrub, and hose down. On the chassis, remove the speaker and put tape over any IF coil openings, etc. Then spray with cleaner and gently scrub with a soft brush and rinse off. Blow dry right away with compressed air or use your leaf blower. Blow into concealed areas like controls, tuner, etc. Put in a warm place (furnace room, for example) for a week. Lube all the controls.
__________________
Reece
Perfection is hard to reach with a screwdriver.
|