View Single Post
  #29  
Old 12-19-2010, 01:23 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
hot chassis means if you "can' come into contact with line current, the set was prob builit with a safty interlock and some means to keep the metal chassis from contact with the user,when plugged in.


CRT and shock you even when unplugged, not enough current to kill, but enough to cause sudden muscle contraction that can cause secondary injury by jerking into something.

The hot chassis on the other hand can kill if pluged into the outlet and you manage to touch it and a good ground, as you can get main level current that way. This is assuming you come into the chassis (the set is apart, plugged in while you are working on it).

There is a lot of opinions about transformerless chassis, from only using them with isolation transformers (even with all the saftys in place) to changing the way they are switched on, to just leaving them as is as long as the saftey interlocks are present, and the chassis isolation mounts are in good shape.

Personally I think they are ok as long as all the safteys are working as designed, but still I would not operate one and be in contact with a good ground. I have a all metal GE tv like that, the entire chassis is isolated from the metal cabinet by a few plastic mounts. Not something I would trust my life on, so I would not grab the plugged in TV while standing barefoot on a concreate floor as an example...


If you dont have one, a good thing to have is a HV probe, easy safe way to discharge the CRT and conveinent tool for checking HV at the CRT anode.
Reply With Quote