Quote:
Originally Posted by wingman
I have a Model 10 amp probe that was an accessory for my 310 which I had back in the 1960's and no longer have. two questions..... will the model 10 amp probe fit the new 310's and 2nd question where is the best place to look for an older model 310?
thanks for your help..........clark
|
Hi Clark! Welcome to the forum!
In general the older amp probes will mount ok on the newer meters, BUT the newer meters do not have the jack on the top surface to make ground connection, just a locating hole. Take a close look at post 2 in this thread... the new amp probes use a 2 wire plug to make both connections to the jacks on the face of the meter. Seems like it would be fairly easy to add a second wire to the older style amp probe, if necessary.
In my collection, most were purchased off of eBay, over the last 2-3 years.
Good Hunting!
jr