View Single Post
  #7  
Old 12-11-2010, 12:38 AM
jr_tech's Avatar
jr_tech jr_tech is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 4,573
Pre-scan

In difficult areas, I have found it helpful to pre-scan the converter box. In my case I just connect the box to my outside antenna and start the scan process.... you might consider taking the rabbit ears and box to a location closer to the transmitter to scan for the channels.
Once the channels have been "found" by the converter box, it is easier to optimize reception in the difficult location. Often moving the antenna a few inches or so will make the difference between no reception and perfect reception. Most boxes have an on screen signal strength display that is helpful. Of course this display does not function on a channel that is not "known" by the box.
jr
Reply With Quote