Thread: Zenith roundie
View Single Post
  #27  
Old 12-09-2010, 07:17 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
progress, at least on the picture, had a open cap in the contrast circuit, much better pic now. Purity and convergence all jacked up, prob from my flipping it around so many times, I may have bumped the static convergence, but the pic is much better. Purity is a mess, but I can work on that later.

the cathode cap was in a can so good chance the others in that can are bad (screen bypass on the video amp was one, not sure about the others).

replaced the cap on the shunt (.022 grid to cathode) thinking it may be leaky, it was not, no change in shunt current still high and hv low (21-22kv).

I am going to take another look at the 1.5 meg to ground in the grid circuit of the shunt. It now seems like that is the only thing that could account for to high a grid voltage, unless for some reason the boost voltage is way, but not sure how that could be.
Reply With Quote