Quote:
Originally Posted by BrianSummers
Hi
The mixed Blanking (MB) goes from IC4 to TR6 emitter on the video amplifier board, in this case both the emitter and base are inputs. TR6 combines the MB with the picture signal by biasing off the transistor during the blanking period. When you come to connect up the yoke some care with the routing and the line scan return wire to the 0v rail. needs to connect close to tR15 and the 220u decoupling cap. A bit like taking care as you would with an audio amplifier to avoid loops!.
Spare IO yokes can be found, They were sometimes changed in service and hidden away by the engineers, as about.
Brian
|
G'day Brian thanks once again. So it's the blanking output of pin 11 on IC4 to the emitter on TR6. One last question in relation to this, just need you to confirm that the blanking pin 1 on the vidicon tube intersects with the blanking output of pin 11 on IC4 as well?