View Single Post
  #150  
Old 11-16-2010, 12:54 AM
kbmuri's Avatar
kbmuri kbmuri is offline
VideoKarma Member
 
Join Date: May 2006
Location: Fort Wayne, IN
Posts: 590
That's a good way to put it. The tubes I've been calling "normal" have the anode connector in-line with pin 3.

My RCA 10FP4 is inline with pin 3, as are my loose 10BP4s and 12LP4's and etc.

Looks like the Beitman's diagram wants one that's inline with pin 6.

I have a Farnsworth 160 that's inline with pin 6, but it's a rebuild. So no conclusions there.

My GE 10FP4 is in line with pin 2. Definitely 30 degrees off "normal", but still not at pin 6. Don't know if it's a rebuild. It's in this set:

Which I'll work on someday if I find (another) set of knobs.

This cabinet:

has an equally dirty chassis somewhere. Not in the mancave, out in the garage. I kept the CRT inside, a GE 10FP4, but it glows pink from air in the tube. Will have it rebuilt someday, if ETF rebuilding happens. Anyway it's a pin 3, like normal, and not rebuilt. So GE made at least one "normal" variety 10FP4.

So not much learned. Am convinced that a truly concours restoration would need a pin-6 orientation. But like I said awhile back, it's a huge nit.

Oh, I see Bob just posted before me, and he agrees. Use the tube as-is and let the wires fall where they may...
__________________

Do not attempt to adjust your set.
Reply With Quote
Audiokarma