View Single Post
  #9  
Old 10-15-2010, 10:44 AM
holmesuser01's Avatar
holmesuser01 holmesuser01 is offline
VideoKarma Member
 
Join Date: Jul 2005
Location: Asheville NC
Posts: 1,731
I own some homebuilt Heath equipment, along with some Dynaco audio stuff. If the builder was a good solderer, I vote to grab the stuff. If not, they can be a real headache, like the Dynaco Stereo 70 that I got that I could bump with a hand and make the channels go out, or make the tubes go out. Its problem was that the builder didnt use enough solder on anything. Many intermittent connections later, all is well, and everything is working as it should. Even found a crossed connection that made everything coming off the preamp play through the output tubes in mono.

Bruce
Reply With Quote