|
Well, one thing I noticed is that the control I was calling the "screen register" is actually the A.G.C. delay. The A.G.C. isn't labeled on the control panel and it's right next to the screen control, which is unused. It's just an empty hole?
So yeah, I can get better contrast by bringing the A.G.C. delay down ( darker but more contrast ) and turning then turning the brightness up. However, the lower the A.G.C. goes, the louder the buzz, and to a certain point, the horizontal starts to jitter really bad.
Last night, I figured out how to auto-program the VCR and use it as a cable box. The television's tuner may be out of alignment, but at least I can get channel 3 cleanly enough to flip through the channels on the VCR without much trouble. Many channels still need a bit of a tweaking to get the buzz to a moderate level ( fine tuning, buzz control, etc ) to where it's not perfect, but certainly watchable.
Where would these peaking coils be located, if I do indeed have one that's potentially open?
|