Quote:
Originally Posted by PaulOF
Arrrgggghhhh.... I had forgotten just how much I hate replacing wires with decaying rubber insulation.
|
I know just what you mean. I have a 1951 Zenith H511Y radio, originally with a power cord having rubber insulation; of course, after 59 (!) years, the insulation was crumbling badly. Replaced the cord with a safe new one a while ago, and was amazed how the insulation on the old one just crumbled in my fingers and was literally falling off the wires -- especially at the point where it enters the chassis. I had used this radio for some time (eight years, to be exact) with the old cord in this condition, and am amazed as all get out that the insulation didn't give out sooner.
I didn't realize until then what a heck of a time bomb I had on my hands as far as shock and/or fire hazards were concerned. The last time I worked on anything with a cord this bad was back in the early 1970s, when the interlock cord on an old GE 16-inch console TV shorted out

and kicked out the circuit breaker in the fuse box. This TV had belonged to my grandmother (who gave it to me after getting a color set in 1969 or '70), and apparently was in her apartment for decades without ever having been moved. By the time I got the GE set the cord was taped up near the molded interlock plug, and the tape was falling off (dried out, no doubt, after 20+ years). The old cord probably had rubber insulation, like the original cord on my Zenith radio; since the TV set was a console, it was put in one place and left there 20 years, with no concern for the condition of the cord. This is, of course, an accident waiting to happen. I consider myself lucky that I wasn't shocked to death when the cord shorted out; however, I was nearly scared out of my wits by the spark from the interlock plug.