|
I saw one get fashioed for an old NEC 60"s B/W - the shop used the top of one of those collapsible water bottles - they just cut off the top inch or so of the bottle. The CRT neck fit loosely through the opening at the top, and the rest of the top was slightly oversized. They used cement (Duco) to hold it, but it got the RTV treatment to secure the rings around the screw threads at the top.
Dunno it that would work, or where you could find a collapsible water bottle these days....
Cheers,
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"
When fuses go to work, they quit!
Last edited by Findm-Keepm; 09-29-2017 at 07:39 PM.
|