View Single Post
  #3  
Old 09-23-2010, 11:48 AM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
Quote:
Originally Posted by Zenith26kc20 View Post
A "Zurtle"! Changed a lot of CRT's in those! Also used a ratchet to get the things up when the motor drive circuit failed! Very heavy set!
The first (and only) time I saw one of these sets was in, IIRC, 1982 or so, at the TV shop (East End TV and Appliance, which specialized in Zenith at the time) in my old neighborhood before the store was moved some 15 miles east, and before it eventually went out of business for good. I've often wondered how many such sets were sold by that store alone.

Another way to keep these sets going when the drive mechanism goes bad, if the rest of the TV still works, is just to rig it so the screen stays up even when the set is off; the TV would then look a lot like a modern (if huge[!]) flat-panel set on a stand. I would disconnect the drive motor as well, so that it cannot start if the button on the remote that activated this function was accidentally pressed. If this is not done, the motor will try to raise an already upright screen and could burn itself out, or the drive mechanism could tear itself apart.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.

Last edited by Jeffhs; 09-23-2010 at 11:06 PM.
Reply With Quote