View Single Post
  #111  
Old 09-19-2010, 09:12 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
the only thing I have left to do is to find a 4 by 6 speaker to go in the TV speaker hole. As is it has a switch that cuts out the stereo and routes the TV amp tube output to the main stereo speakers. Works ok, but I would much rather have the option of power the TV audio thru the tape input (aux) and bypass the TV tuneer completly for audio. I have done this on a maggie astrosonic tv and it sounds great. I tried it out already (to check levels on the aux input to the convert box output, all fine).

The only reason I want the small speaker is on the off chance I get a UHF channel that is OTA and need the analog tuner for sound. Also I dont like the idea of disabling the audio completely, as it would no doubt be confusing to any one that gets this thing some were down the road. I will of course leave all the wiring harness in place so it can be converted back to the orig setup.

I will check around my stash and see if I can find that 4x6. I check the mounting with a scrap speaker (cone shot to heck), it has some nubs that just barely are long enough to do the job. They are not machined, more like locating pins, but I can not see any thing to screw into. I will prob just silcone in the speaker around those nubs or see if I can find some of those star washers, the kind that push on but don't come off. Not sure if the pins are long enough for them.
Reply With Quote