View Single Post
  #7  
Old 09-06-2010, 03:58 PM
mbates14 mbates14 is offline
VideoKarma Member
 
Join Date: Apr 2004
Posts: 1,016
I know on the 50X3 the ER is coupled into the same output as the SUS module. then the outputs from those 2 modules combined, go into a MOSFET bank.

I havent the slightest idea how that board works, but i understand the concept. thats about it.

And what I understood is the panel is addressed like memory with all the information and pixel data written into the panel first.

then the sustain pulse comes that discharges the gas in all the addressed electrodes. then the erase pulse comes and clears the entire address plane. and the process starts over again.
Reply With Quote