Say what you will, but these TVs are very reliable once the problem with the on-board tuner is resolved. I have an F19261 RCA (chassis CTC185A7) which I bought new ten and a half years ago. The only repair work that has ever been done on this set was to replace a broken RF port on the tuner PC board, and, at the same time, the technician resoldered the grounds around the tuner. The TV has worked flawlessly ever since, and mine gets used quite a bit every day of the year. The picture is excellent as well, like a good photograph or a picture postcard, owing to the video processing circuitry on the EEPROM (maybe a simplified version of RCA's ColorTrak system, without the photocell) and the dark-tint inline CRT; the colors are so rock-stable and dead-on accurate I very rarely need to adjust the on-screen controls. The technician who repaired my set also told me there is a problem somewhere in the EEPROM that could affect the picture, but I have cable and haven't noticed the problem in all these years; if I haven't seen it by now, chances are I never will.
As to the sound quality, yes, it is low-grade due to the small transistor-radio speaker, but that's what you get in today's table model TVs, even the ones with MTS broadcast stereo sound. Whatever you do, however,
don't connect an external speaker across or in place of the speaker in the set. This would probably work well if the connections to the speaker and to the TV audio output are solid, but if the speaker leads short to each other or to ground, the result will be serious and permanent damage to the chassis,

since this is a "hot chassis" design not unlike the old transformerless tube sets. If you want to upgrade this TV's sound, use the audio output jacks on a VCR or DVD player and connect them to an external amplifier or hi-fi system.