View Single Post
  #6  
Old 09-02-2010, 06:51 PM
YamahaFreak's Avatar
YamahaFreak YamahaFreak is offline
<-- CSXT 6038, EMD GP40-2
 
Join Date: Dec 2005
Location: TOO sunny Florida, USA
Posts: 580
Quote:
Originally Posted by old_tv_nut View Post
Yes. Regular shadow masks (either triad or in-line) are self supporting, but the aperture grill is made of vertical strips that are under tension. If overheated (by a intense bright white area), the shadow mask "domes" and can lose purity. The aperture grill, because it's under tension to hold the elements straight, doesn't distort until it is really overheated and starts to sag.

By the way, Trinitron grills typically have three very fine horizontal wires across the screen at about 1/4 height, middle, and 3/4 height, to keep the grille from vibrating. Once someone sees these, they may focus on them and find them annoying. If you haven't noticed them, don't try looking unless you want to notice them every time.
My 15" Trinitron computer monitor (trash find, rescued) has these support wires, but only two, about 1/3 and 2/3 up the screen. They don't bother me too much. (That monitor was made in '97, so it must be one of the last ones built with a real Trinitron gun, it's not an in-line gun.) I have yet to discover said support lines inside my 40" Trinitron, even looking very closely against a white screen.
__________________
Sony Trinitron Fan
Reply With Quote