|
Funny you mention that, I am currently working on a Toshiba branded LG model 50HP66. The whitewash is in the menu under setup. This function is used to pull full voltage from the power supply so you can setup the output adjustments. Also it is known to be used to clear any residual burn in. Plasma screens are real suceptable to short term burn. If you want to try to tackle adjustments, you could hook up a computer to the VGA port and go to the internet explorer or open up a white page. This will do the same thing as the white wash feature. I just repaired a 2000 model Pioneer. Used the computer technique to adjust the power supply. This set had a blown mosfet and a ceramic power resistor in the PS. Pioneer plasmas are well known for power supply issues. This one had alot of maldischarge after i got it up and running again. The VS and VA were off by 2 to 3 volts. Thats enough to put the colored snow all over the raster.
Good luck.
__________________
Honey, turn on the tv.. I'm cold!
|