|
Yes, the color problems are a result of a weak CRT. I don't know exactly how it works; but, these sets have a circuit called AKB (auto kine bias). This circuit eliminated the traditional screen and drive set-up controls and automatically adjust the greyscale. When one or more guns inside the CRT get too weak for the AKB circuit to do it's job, it will cause the picture to blink on and off as the AKB circuit is trying to adjust the proper bias for the guns; but, the tube is too weak for the circuit to correct the problem.
One thing you might try is adding a CRT brightener. You can get them from places like MAT electronics and they solder in to the filament circuit. This will likely cure the problem; but, the fix will only be temporary. How long will the CRT last? It's hard to say, with or without a brightener. It could last a week, month, six months, or a year; but, it will likely die sooner rather than later.
Those later Sony CRT's, like much of everything else today, seems to have been built to a lesser standard. In my experience, the ones that hold up the best are tubes from the '80's. I have a mid '80's entry level 19" trinitron that still has a good CRT and it has seen lots of hours since I've had it over the last 8 or 9 years.
However, I've seen many of the '90's era sets with weak tubes. I have a B&K 470 CRT tester and, for some reason, B&K never made a dedicated socket for the '80's and later tubes. I finally made an adapter, using a socket from a junk chassis and any trinitron that's dead gets it's CRT checked before I go any further. Nothing is more frustrating than to fix a dead Sony (or, any other TV) and find out that the CRT is wasted.
|