Quote:
Originally Posted by radiotvnut
I think Panasonic is a good brand.
That device between the flyback and the CRT is likely a focus resistor. Are there any adjustments on this device and does it have any leads that go to the CRT socket?
|
That IS a focus resistor--BUT it is for "dynamic focus" I think, and is not adjustable. the 2 focus controls should be on the fly itself.
ALSO--Make SURE you resolder ALL of the connections to the vertical output chip(near the flyback on a sink" and around the fly and H-driver area too--to insure a good repair. I used to fix a LOT of those sets a few years ago. NOt, of course it is nearly all flat-panels.