|
You may be interested in seeing how many hours are on your TV - this is the procedure to enter the service mode and read the counters. This should work for all these Sony LCD rear projection sets
KDF-E42A10/E50A10
RM-YD003
Reading Lamp and Panel time
Use the following to determine the lamp and panel time of a set.
Screen Display Method
In standby mode, press the buttons on the Remote Commander sequentially, in rapid succession, as shown below:
1. Press Display , Channel 5 , Sound Volume + , Power ON
2. To enter BE-micro service menu, press JUMP 2 times.
CONFIGRATION 00 SERVICE
CP18_COLOR_SYS 00 00A0 BE Micro
3. To display the lamp time, press Channel-4.
GW_SPECIAL 34 SERVICE
LAMP_TIME 02 00000014 BE Micro
The screen displays:
“ Total lamp time is 14 hours”
4. To display the panel time, press Channel-4.
GW_SPECIAL 34 SERVICE
PANEL_TIME 01 00000014 BE Micro
The screen displays:
“ Total panel time is 14 hours”
5. To display the lamp time clear, press Channel-5 7 times and Channel-1.
OPTION_E 20 SERVICE
LAMP 01 0000 BE Micro
To reset the lamp time press Channel-3 > MUTING > ENT.
WRITE (Character color is red) is momentarily displayed and the lamp time is reset to “0”.
Exiting Service Mode
After completing the changes exit service mode by turning off the set using the Remote Commander or the power switch.
|