|
My tranny is about 3 3/4" X 3 1/8" more or less. The measurement is mounting bolts center to center.
I have a 6.3v filament tranny rated at 14 amps. I tied it to the filament circuit.
Everything except the Hz output, and damper lit up. It was nice to see this.
Output and damper lit up when I disconnected one of the primary leads on this fried tranny and applied power to the set.
EDIT: I am replacing all electrolytics and many other caps before this set is turned on. Im going to store the cabinet and bring the chassis inside for some work.
Another EDIT: Lost my mind and listed both the hz output and the damper as being on the 2nd transformer. Only the damper is on that tranny.
Last edited by holmesuser01; 08-16-2010 at 02:58 PM.
Reason: The poster is losing his mind, fast!!
|