Thread: Zenith console
View Single Post
  #68  
Old 08-14-2010, 09:03 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
I forgot to check the line voltage, when I set it for 117vac I get 185ma.

clearly this set voltage regulation holds the HV very well. I am tempted to add some resistance to the screen to drop the HOT current since line voltage tends to be higher than that. Currently there is a 470 ohm resistor there.

there is also a confusing to me note on the sams. the is a 33k 2 watt resistor in the screen circuit (just before the above noted 470) R154, then in parens it shows 17k 5 watt. also not sure why a the lower resistor would have the higher wattage. thats odd, if anything I would have thought it to be the other way.

I also plan to add a B+ fuse like I did on the philco roundie and add a fuse to the HOT cathode circuit.
Reply With Quote