View Single Post
  #6  
Old 08-14-2010, 08:00 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
I don't think I've had a tripler go bad in this chassis; but, I have had one go bad in one of the newer flat chassis RCA colortrak sets of the late '70's. The symptom was a squealing sound at turn-on followed by the set shutting down. When I unsoldered and removed the HV input wire (wire coming from flyback transformer) to the tripler, the set came on and stayed on. There was, of course, no HV to the CRT; but, it had sound from the speaker. If you remove the input lead to the tripler, make sure it can't arc to something else. If the tripler is bad, removing it from the circuit should restore sound from the speaker.

Over the years, I've found that the triplers in RCA sets are more reliable than the ones in Zenith and Sylvania sets. I'm basing my opinion on the number of RCA triplers that I've replaced vs. triplers in other brands.

Oh, and I remember one other bad tripler in an RCA CTC68 console. That one actually cracked and busted in half.

If I were close to you, I'd be glad to take on your set. Hopefully, someone in your area will chime in and agree to help you out with this one.
Reply With Quote