Thread: Variac
View Single Post
  #6  
Old 07-28-2010, 04:51 PM
Eric H's Avatar
Eric H Eric H is offline
Administrator
 
Join Date: Jun 2002
Location: So. Calif
Posts: 11,565
I wouldn't start an old set that's been sitting for decades without some sort of soft start.

While it's true you would probably notice anything amiss before it damaged something there's always a possibility you won't.

For example, a 5U4 tube can be destroyed instantly by a short in the B+ line, power transformers can overheat quickly, Selenium Rectifiers stink to high heaven if they overload or short, plus who need the shock of having something like a capacitor go pow with your face a foot away from it.

You can make a cheap Soft Start device with an old multi light bathroom fixture and 4 100W light bulbs.
Just wire the four bulbs in parallel on one side of a power cord, then you just screw in one bulb at a time, 100 watts should come on brightly then dim to 1/2 -2/3s quickly, 200 watts should dim even more, if you reach three bulbs and they are all still lit more than a dull glow you have a short somewhere.

Some sets like a big Dumont may require more wattage (just get bigger light bulbs) but you'll get the feel of it quickly enough.
Reply With Quote