|
This came up because I contacted Bryan to see if one of his duds could be shipped to Scotty, to get rebuilt before he closes his doors. Turns out that not only is there not much time left, but Scotty has 'tightened up' his requirements as to what tubes he will accept in his last week.
Bryan's FJP tubes may have gone to air, and Scotty has said he will not attempt a rebuild on them. The reasons he gave me were that if the tube went to air, it could have disturbed the phosphor deposits on the face. Not only that, but if the tube had developed a leak where the face is joined to the bell via frit glass, that is a repair that he cannot make.
So it's a toss up. If you currently have the money for a rebuild and your tube has not gone to air, I would take the 50/50 shot at getting a good tube done while he is still accepting them for rebuilds. If not, I would wait (as Bryan and I have chosen to do). This way if/when the gear gets set up at ETF and someone has learned 'the way', you can have better piece of mind of what you're getting into.
|