Tried set today. Had my video back. However, bringing variac up, an old hv problem happenned again. Raster kept flashing on, and, off, and, I was getting alot of static noise in speaker. I heard sizzling in chassis.
I shut it down. Smelled like something burning.
This happenned twice befor with shorts on horiz. out. socket.
Tonight, reluctantly, I took set back apart, and, put a very strong light on output socket.
I found something!
Factory problem Number 586.
On pin 5, a resistor, there is a tiny piece of the resistor wire sticking sidewayl
Wait a min.!
That's pin 4 and, 3. Pin 4 is a tie point.
Well, that short little piece of lead had a tendency to intermittently short to pin 3.
I moved the two pins away from each-other.
Then, a 47 ohm resistor going to adjustable cap off p5 broke loose from cap due to poor solder connection.
So, tommorrow, I have to fix that.
Then, I'm going to give that circuit one real good going over again. If I see no more problems, I'll put it aback together, and, try it again.
This set has truly been this technician's nighmare!
If I never run into another problem set like this again it will be too soon!
How many times, I wonder, did this set keep breaking down?
It must have been a constant problem to keep it running.
This set should have been torn down at the factory, and, re built.
It was a major lemon!!
Now, this may have actually been the cause for it blowing high voltage fuses for original owner in 70's.
This set had a 10A fuse in it. Flyback was cooked.
For a year I kept getting intermittent shorts on horiz. out. socket, but, every time I tried to find the problem, it went mysteriously away.
Today, it had returned..
This set is very frustrating.
I hope that outside of final adjustments, this will finally finnish this saga once, and, for all....
Bill Cahill
__________________
"Tubes are those little glass things that light up orange unless there is a short.. Then they light up all pretty colors..."
Please join my forum.
http://www.tuberadioforum.com/
|