View Single Post
  #4  
Old 07-21-2010, 12:25 AM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
I know this won't make you feel any better; but, I just tossed an E32 knob tuned 19" Philco (same as Sylvania and Magnavox) that still somewhat played. Someone gave it to me and the cabinet was beat up, CRT was weak, it had loose connections on the chassis that looked to have had about a million hours on it, and the fine tuning gear in the tuner was busted. Still, I resoldered the bad connections, jolted the CRT, and managed to get the tuner to work on channel 3. I used that set for close to a year, when the CRT started dying again. I tossed it around the shop for a few months until I got orders to downsize.

Even though that set is gone, I think I may have a new flyback in a box that I got from a repairman. I think he said that he installed it in the set, only to find out that the flyback was not the problem and I think he put the old one back in. Even if I can't come up with anything, don't give up. E32's are still fairly common and, sooner or later, you'll find one. At one time, one of the hospitals had a load of E32 19" hospital grade sets in all the rooms and some of them were still in use as recent as the late '90's.

And, don't ever feel bad about spending more on a set than it may be "worth". The fact is that those older sets are far better than most anything made today and I'd rather spend $100 on an old set that I knew would last and could be repaired in the future than some chinese made flatscreen that will be in the dump in 5 years.

I know those old Sylvania sets had a great picture when they were working properly. My favorite models are the ones from the '70's with a delta gun CRT and the horizontal modular chassis.

I wonder if your set is a genuine Sylvania or was it built after the NAP takeover in mid '81?
Reply With Quote