View Single Post
  #3  
Old 07-17-2010, 07:56 PM
ctc17 ctc17 is offline
VideoKarma Member
 
Join Date: Jul 2009
Posts: 1,615
Im with you Dave, that selenium rectifier needs to go. You can put a regular silicone diode in there. You will need to put a resistor in series with the new diode because the new silicone diode is much more efficient that the old one. Usually 20-30 ohm 5 watt resistor would be ok.

As a test you could leave the diode, coil and cap hooked up disconnecting the power connections for the cap to the set and see if the breaker still trips, then you would prove its the rectifier.
Reply With Quote