View Single Post
  #8  
Old 07-15-2010, 11:17 PM
Dennman6's Avatar
Dennman6 Dennman6 is offline
VideoKarma Member
 
Join Date: Aug 2006
Location: Indianapolis
Posts: 61
Quote:
Originally Posted by andy View Post
I usually like to put back missing pieces of wax, and seal up any cracks my carefully melting it with a soldering iron on low heat. It's not a big deal on a B/W set, but you can get some arcing or corona when the wax tire has a break in the wrong place.
Yes, I have a circa 1960-61 Magnavox that got its 2nd CRT around 1978, an RCA Silverama. It works fine, but there is some arcing. It was given to us by my Uncle Joe, who hauled it 3 hours up the NYS Thruway upside down in his Suburu Brat Easter weekend 1979. It made the trip from Schenectady to Syracuse OK, & still works well. Beautiful set in French Provinicial walnut, here's a few pics taken in 1993. Wanted to get the CRT in it rebuilt by Hawkeye too, but he closes at end of July & my money's tight right now anyway. The RCA needed more attention, so what can one do?
Attached Images
File Type: jpg Maggie1.jpg (46.3 KB, 21 views)
File Type: jpg Maggie2.jpg (84.8 KB, 23 views)
File Type: jpg Maggie4.jpg (64.5 KB, 24 views)
__________________
"Take time to deliberate. But when the moment for action arrives, stop thinking and go in!"-Andrew Jackson
Reply With Quote