View Single Post
  #8  
Old 07-07-2010, 11:07 PM
Tom Albrecht's Avatar
Tom Albrecht Tom Albrecht is offline
VideoKarma Member
 
Join Date: Mar 2010
Location: San Jose, CA
Posts: 683
If you don't have a suitable source for composite video, you can also just use a normal function generator. If you inject a nice big (several volts amplitude) audio tone (1000 Hz is a good choice) into the grid of the video amp, you'll see some nice bars (not synched) across the screen that will tell you the video amp and CRT are working. Then start backing up into the video IF, using audio modulated RF (at the IF frequency).

You can also inject an audio signal right into the CRT cathode or grid, but here it has to be pretty high amplitude (10 V amplitude works OK). Not every function generator will produce a signal that big.
Reply With Quote