Quote:
Originally Posted by Reece
McMaster Carr will sell you lesser quantities for a lot less money. Depending on the gauge, cut it with tin snips. Use C-clamps and clamp edge between two pieces of wood and bend as required, hammering on another piece of wood against the metal to make the sharp 90.
http://www.mcmaster.com/#catalog/116/405/=7uzwm7
|
Seems about the same to me

The back is about 16 gauge steel.
McMaster $47.74 for 36" X 40" = $0.03 / sq. in.
McNichols $152.80 for 40" X 120" = $0.03 / sq. in.
On the other hand, the smaller piece is a heck of a lot easier to deal with
I got my quote. $163 for 10 pieces cut to size. So, $16.30 each + whatever shipping might be.