View Single Post
  #3  
Old 06-25-2010, 06:15 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
the HV lead off the anode button has a plastic stand off, but further down the lead it come directly into contact with the metal CRT shield, and it looks a bit blackish right there. I am going to wipe that off, and get a closer look at it. Will also make up a little card board stand off to get that away from the metal shield.

there was a large amount of dust all around the rubber anode boot as well.
seems like a red substance is sealing it to the crt.


Question about a CRT short making the snap, would not an internal arc be silent, inside the high vacuum of the CRT?
Reply With Quote